Illustra Flex Series Installation and Configuration Guide
8200-1456-01 D0
91
Deleting an Address Filter
Delete an existing address filter.
Procedure 112 Delete an Address Filter
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Firewall
from the
Security
menu.
3
Select the
Address Filtering
tab.
4
Select to
delete the corresponding address filter.
- End -
Remote Access
SSH Enable
Enables Secure Shell access into the camera, if remote access is permitted by the camera network.
This will also enable Tyco Security Products Level 3 Technical Support to diagnose any problems on
the camera.
Note:
It is recommended to keep SSH Enable disabled. This function should only be enabled this
when it is requested by Tyco Security Products Level 3 Technical Support.
Procedure 113 Configure SSH
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Remote Access
from the
Security
menu.
The
Remote Access
tab displays.
3
Select the
SSH Enable
check box to enable SSH.
OR
Deselect
SSH Enable
check box to disable SSH.
The default setting is ‘Disabled’.
- End -
ONVIF
The Web User Interface allows ONVIF functionality to be managed at a high level. ONVIF Discovery
Mode and User Authentication can be enabled or disabled.
• ONVIF Discovery Mode allows enabling or disabling discovery of the camera via ONVIF.
• ONVIF User Authentication allows the camera to accept ONVIF commands from all users
or only authenticated users. Enabling User Authentication ensures the camera will only
execute commands from authenticated users.
