6
CRX-POSTX-DIN
DIN Rail PostX IP Reporting Module
Installation Manual | June 2017
1
Welcome
Thank you for purchasing the PostX DIN Rail IP Reporting Module by Integrated Control Technology. The PostX
Module is designed to help transition existing alarm monitoring solutions from traditional PSTN reporting to IP
capable devices with minimal effort and at a low cost.
The current features of the PostX module include:
Full PSTN phone line emulation circuit that will interface with any alarm panel.
10/100 Base-T Ethernet
GPRS support*
WiFi support*
Independent modem that supports downstream phones.
4 configurable inputs
2 programmable outputs.
Small physical size to fit inside existing installations.
12VDC power supply input.
Emulates a full CID receiver.
UDP and TCP based IP reporting protocols.
Configurable 128, 192 or 256 bit AES encryption.
Fully configurable through an Internet browser.
Backup reporting options.
64 message queue.
Industry standard DIN Rail mounting
Online and remote upgradeable firmware
For more information on the PostX DIN Rail IP Reporting Module and other Integrated Control Technology
products please visit our website (http://www.ict.co).
* Applies to WiFi and/or GPRS editions (see page 7) only.
1.1
Document Conventions
This document uses the following conventions:
Important warnings or cautionary messages to prevent equipment damage, data loss, or other
similar conditions
i
Notes with additional information such as an explanation, a comment, or a clarification about the
subject
Tips containing practical information that may help you solve a problem or describing actions that
may save you time
UL
ULC
Information relating to UL and ULC compliance
[TEXT]
Bold text enclosed in brackets is used to show a section number or address of a programmable
option or information on programming shortcut sequences