manualshive.com logo in svg

ICT CRX-POSTX-DIN, Руководство по установке, Страница: 15 / 68

Поделиться
Скачать
ICT CRX-POSTX-DIN Скачать руководство пользователя страница 15

CRX-POSTX-DIN 

DIN Rail PostX IP Reporting Module 

Installation Manual | June 2017   

15

 

 

6

 

Interface Configuration 

This section details how to establish an Ethernet connection with the PostX Module. When the module comes 
out of the box it is set to a static IP address of 192.168.1.2 with a subnet mask of 255.255.255.0 for the 
Ethernet interface. If your computer network is on this subnet, and no other computer on the network uses this 
address, then you will be able to connect to the PostX Module immediately. 

 

i

 

Installing the PostX Module on an active network requires knowledge of the configuration and 
structure for the network. Always consult the network or system administrator and ask them to 
provide you with a fixed IP address that can be assigned to the module. 

 

 

6.1

 

Establishing Ethernet Connection 

DIN Rail PostX IP Reporting Module IP Settings 

Before attempting to connect to the PostX Module it is necessary to know the IP address that it is currently set 
to. The default factory setting for the Ethernet interface IP address of the PostX Module will be: 

192.168.1.2 

The suggested methods for connecting your PC or laptop to the PostX Module include via either a switch/hub 
or a direct connection as shown in the section Ethernet 10/100 Network Interface (see page 13). 

PC/Laptop IP Settings 

You should then configure your PC or laptop’s network interface to use the following settings: 

IP Address: 192.168.1.4 – 192.168.1.254 

Subnet Mask: 255.255.255.0 

Please select the IP address for your PC or laptop from the range given above, ensuring it is not currently in use 
by any other device connected to your network. For information on configuring the network interface for your PC 
or laptop, please visit the Web Support Centre for your particular operating system. Guides for the following 
operating systems can be found at: 

 

Microsoft® Windows XP 

http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/howto_enable_dhcp.
mspx?mfr=true 

 

Microsoft® Windows Vista 

http://windows.microsoft.com/en-US/windows-vista/Change-TCP-IP-settings 

 

Microsoft® Windows 7 

http://windows.microsoft.com/en-US/windows7/Change-TCP-IP-settings 

Should the IP address need to be restored to the default value, please refer to the section on IP Troubleshooting 
(see page 37) for more details. 

 

Содержание CRX-POSTX-DIN





































































Отзывы:

Нет отзывов