22
CRX-POSTX-DIN
DIN Rail PostX IP Reporting Module
Installation Manual | June 2017
Each zone input can use a different input configuration. When using the No Resistor configuration (i.e. EOL
Resistor option not checked), the PostX Module only monitors the opened and closed state of the connected
input device generating the (OPEN) alarm and (CLOSED) sealed conditions.
N.C Zone Contact
V+
V-
Z4
V-
Z3
Z2
V-
Z1
Normally Closed Zone Configuration No Resistors
Contact ID Messages
Each input can be independently configured to send an Ademco Contact ID message when the zone changes
state. These messages will be sent using the settings defined under the Routing Setup (see page 17). In other
words, they will be treated the same as messages received from the alarm panel connected to the PostX.
Account Code
This is a 4 digit code that the monitoring station uses to identify where the Contact ID message has come
from.
Alarm Code
This is the standard 3 digit Contact ID event code to indicate the type of event that is being reported. The
following table shows some example event codes that may be used.
It is recommended that you always
consult your monitoring station for more details regarding the specific event codes to use.
Alarm Code
Event Type
130
Burglary Alarm
140
General Alarm
146
Silent Burglary
150
24 hour Non-Burglary
300
System Trouble
380
Sensor trouble
Tamper Code
This is the standard 3 digit Contact ID event code to indicate the type of event that is being reported. The
following table shows an example event code that may be used.
It is recommended that you always consult
your monitoring station for more details regarding the specific event codes to use.
Tamper Code
Event Type
137
Input Loop Cut/Shorted
Group Number
The Group Number or Area Number is a 2 digit code to indicate the group or area that the even belongs to.
Use 00 to indicate there is no specific group or area information.
Zone Number
The Zone Number or User Number is the 3 digit code to indicate the specific zone that has had the event.
Use 000 to indicate that there is no specific zone or user information.