IBM Storwize V7000 Скачать руководство пользователя страница 143

Страница: 143 / 172

Table 26. Error event IDs and error codes (continued)

Event
ID

Notification
type

Condition

Error
code

062001

Unable to mirror medium error during volume copy
synchronization

1950

062002

The mirrored volume is offline because the data cannot
be synchronized.

1870

062003

The repair process for the mirrored disk has stopped
because there is a difference between the copies.

1600

070000

Unrecognized node error.

1083

070510

Detected memory size does not match the expected
memory size.

1022

070517

The WWNN that is stored on the service controller and
the WWNN that is stored on the drive do not match.

1192

070521

Unable to detect any Fibre Channel adapter.

1016

070522

The system board processor has failed.

1020

070523

The internal disk file system of the node is damaged.

1187

070524

Unable to update BIOS settings.

1027

070525

Unable to update the service processor firmware for the
system board.

1020

070528

The ambient temperature is too high while the system is
starting.

1182

070550

Cannot form cluster (system) due to lack of resources.

1192

070556

Duplicate WWNN detected on the SAN.

1192

070558

A node is unable to communicate with other nodes.

1192

070562

The node hardware does not meet minimum
requirements.

1183

070564

Too many software failures.

1188

070574

The node software is damaged.

1187

070576

The cluster (system) data cannot be read.

1030

070578

The cluster (system) data was not saved when power
was lost.

1194

070580

Unable to read the service controller ID.

1044

070690

Node held in service state.

1189

071500

Incorrect enclosure.

1021

071501

Incorrect canister position.

1192

071502

No enclosure identity; cannot get status from partner.

1192

071503

Incorrect enclosure type.

1192

071504

No enclosure identity and partner does match.

1192

071505

No enclosure identity and partner does not match.

1192

071506

No enclosure identity and no state on partner.

1192

071507

No enclosure identity and no node state.

1192

071508

Cluster (system) identity is different on the enclosure
and the node.

1023

071509

Cannot read enclosure identity.

1036

Chapter 9. Event reporting

127

Содержание Storwize V7000













































































































































































Результаты поиска

Содержание Storwize V7000

Отзывы:

Похожие инструкции для Storwize V7000

Бренды по названию

Популярные бренды

IBM Storwize V7000, Руководство по обслуживанию

Результаты поиска

Содержание Storwize V7000

Отзывы:

Похожие инструкции для Storwize V7000

Бренды по названию

Популярные бренды