IBM Storwize V7000 Скачать руководство пользователя страница 138

Страница: 138 / 172

Table 26. Error event IDs and error codes (continued)

Event
ID

Notification
type

Condition

Error
code

010025

A disk I/O medium error has occurred.

1320

010026

A suitable MDisk or drive for use as a quorum disk was
not found.

1330

010027

The quorum disk is not available.

1335

010028

A controller configuration is not supported.

1625

010029

A login transport fault has occurred.

1360

010030

A managed disk error recovery procedure (ERP) has
occurred. The node or controller reported the following:

Sense

Key

Code

Qualifier

1370

010031

One or more MDisks on a controller are degraded.

1623

010032

The controller configuration limits failover.

1625

010033

The controller configuration uses the RDAC mode; this is
not supported.

1624

010034

Persistent unsupported controller configuration.

1695

010040

The controller system device is only connected to the
node through a single initiator port.

1627

010041

The controller system device is only connected to the
node through a single target port.

1627

010042

The controller system device is only connected to the
cluster (system) nodes through a single target port.

1627

010043

The controller system device is only connected to the
cluster (system) nodes through half of the expected
target ports.

1627

010044

The controller system device has disconnected all target
ports to the cluster (system) nodes.

1627

010050

A solid-state drive (SSD) failed. A rebuild is required.

1201

010051

A solid-state drive (SSD) is missing.

1202

010052

A solid-state drive (SSD) is offline as a result of a drive
hardware error.

1205

010053

A solid-state drive (SSD) is reporting a predictive failure
analysis (PFA).

1215

010054

A solid-state drive (SSD) is reporting too many errors.

1215

010055

An unrecognized SAS device.

1665

010056

SAS error counts exceeded the warning thresholds.

1216

010057

SAS errors exceeded critical thresholds.

1216

010058

The drive initialization failed because of an unknown
block size or a block size that is not valid; an unknown
capacity or a capacity that is not valid; or was not able to
set the required mode pages.

1661

010059

A solid-state drive (SSD) is offline due to excessive
errors.

1311

122

Storwize V7000: Troubleshooting, Recovery, and Maintenance Guide

Содержание Storwize V7000













































































































































































Результаты поиска

Содержание Storwize V7000

Отзывы:

Похожие инструкции для Storwize V7000

Бренды по названию

Популярные бренды

IBM Storwize V7000, Руководство по обслуживанию

Результаты поиска

Содержание Storwize V7000

Отзывы:

Похожие инструкции для Storwize V7000

Бренды по названию

Популярные бренды