IBM s-series, Инструкция по установке и эксплуатации, Страница: 95 / 170

FastIron# show chassis
...
Fan controlled temperature:
Rule 1/3 (MGMT CARDS THERMAL PLANE): 55.5 deg-C...
Rule 2/3 (LINE CARDS THERMAL PLANE): 59.6 deg-C...
Rule 3/3 (SWITCH FABRIC CARDS THERMAL PLANE): 78.7 deg-C...
Syntax: show chassis
Displaying fan status and speed
The show chassis command displays the status and speed of the fans in the
chassis. The following shows an example output which supports four fan speeds.
# show chassis
...
Fan 1 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 2 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 3 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 4 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 5 ok, speed (auto): 1<->[[2]]<->3<->4
Fan 6 ok, speed (auto): 1<->[[2]]<->3<->4
Syntax: show chassis
For each fan, the display shows the following information:
Table 23. Information displayed regarding fan status
Field Display
Status The status of the fan. This field can be one of the following:
OK - The fan is functioning properly and is keeping the temperature of each module
within an acceptable temperature range.
Failed - The fan is not functioning properly or the fan control module cannot control the
fan.
Speed The speed at which the fan is currently operating (denoted by double brackets).
1 (low) - The fan is functioning at 25 percent of capacity.
2 (medium-low) - The fan is functioning at 37 percent of capacity.
3 (medium) - The fan is functioning at 50 percent of capacity.
4 (high) - The fan is functioning at 100 percent of capacity.
NOTE: If the report shows that a fan has failed , the report does not show the fan’s
speed.
Displaying temperature warnings
If the temperature of a module exceeds the high temperature threshold for any of
the fan speeds, the system sends a message to the system log. This section
describes how to view the system log. If you have configured the system to use a
Syslog server, see the documentation for the server or receiver.
To display the system log, enter the following command at any CLI level:
# show log
...
Dynamic Log Buffer (50 lines):
Chapter 5. Managing the Chassis and Modules
69