IBM s-series Скачать руководство пользователя страница 86

Страница: 86 / 170

Table 18. Chassis status and temperature Information (continued)

This Field...

Displays...

Speed <Operating mode>

The operating mode of a fan can be one of the following:

Auto (automatic) - This is the default

Manual

The fan speed for the B08S can be one of the following:

1 (low) - The fan is functioning at 25 percent of capacity.

2 (medium-low) - The fan is functioning at 37 percent of capacity.

3 (medium) - The fan is functioning at 50 percent of capacity.

4 (high) - The fan is functioning at 100 percent of capacity.

For the B16S, the fan speed can be one of the following:

1 (low) - The fan is functioning at 20 percent of capacity.

2 (medium-low) - The fan is functioning at 40 percent of capacity.

3 (medium) - The fan is functioning at 60 percent of capacity.

4 (medium-high) - The fan is functioning at 80 percent of capacity.

5 (high) - The fan is functioning at 100 percent of capacity.

The current fan speed is shown in double brackets.

Temperature Readings

Fan controlled temperature

The B08S and B16S display the temperature reading of the management, interface,
and switch fabric modules:

Rule 1/3 - The highest temperature reading of the management module(s).

Rule 2/3 - The highest temperature reading of all the interface modules.

Rule 3/3 - The highest temperature reading of the switch fabric modules.

Fan speed switching
temperature thresholds

The B08S and B16S display the configured temperature thresholds for the
management, interface, and switch fabric modules.

Rule 1/3 (MGMT CARDS THERMAL PLANE) - The configured temperature
thresholds for the management module(s).

Rule 2/3 - (LINE CARDS THERMAL PLANE) - The configured temperature
thresholds for all the interface modules.

Rule 3/3 - (SWITCH FABRIC CARDS THERMAL PLANE) - The configured
temperature thresholds for the switch fabric modules.

The output displays fan speed information for each of the above thermal planes:

The B08S has four fan speeds.

The B16S has five fan speeds.

Slot <number> Temperature

The temperature of each module.

On the B08S and B16S, the management modules reside in slots 9 and 10 and the
switch fabric modules are

SF 1

and

SF 2

Miscellaneous Information

Ethernet Switch s-series Installation and User Guide

Содержание s-series











































































































































































Результаты поиска

Содержание s-series

Отзывы:

IBM s-series, Инструкция по установке и эксплуатации, Страница: 86 / 170

Результаты поиска

Содержание s-series

Отзывы: