IBM s-series, Инструкция по установке и эксплуатации, Страница: 37 / 170

Figure 6 shows the front panel of the IPv4 management modules with two 10-GbE
ports.
The front panel on the management modules include the following control features:
v A console port and 10/100/1000 RJ-45 copper port allow you to access the
system’s CLI directly from a PC or terminal or via a Telnet connection to the PC
or terminal.
v Depending on the type of management modules installed in the device, the
management modules have the following ports:
– no 10-GbE fiber ports
– two 10-GbE fiber ports
v
LEDs for power and active/standby status
v Four LEDs for the two 10-GbE fiber ports (2-port 10-GbE modules only)
v
A recessed reset button
10/100/1000 GbE copper port on the B08S and B16S
management modules
The 10/100/1000 RJ-45 copper port on the management module enables you to
attach a PC or terminal. From this Ethernet port, you can access the system’s CLI
or Web management interface directly from the PC or terminal or via a Telnet
connection to the PC or terminal.
10-GbE ports on the B08S and B16S 2-port 10-GbE management
modules
The B08S and B16S 2-port 10-GbE management modules come with two 10-GbE
fiber ports through which you can connect your device to other network devices at a
speed of 10 Gigabits per second.
The 10-GbE ports support 10-Gigabit Small form Factor Pluggable (XFP)
MSA-compliant transceivers. The transceivers support the fiber optic cabling for
LAN PHY.
LEDs on the B08S and B16S management modules
The management modules provide status information using the LEDs listed in
Table 5 on page 12.
Pwr
Console
Ethernet
1 0 /1 00 /1 000
Act i ve
net
0
8bs
0
11
Figure 5. B08S and B16S management module with no ports
Pwr
Console
1 2
Ethernet
1 0 /1 00 /1 000
Act i ve
L i nk
Act
L i nk
Act
net
0
8bs
0
12
Figure 6. B08S and B16S management module with two 10-GbE ports
Chapter 2. Product Overview
11