IBM s-series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 170

IBM s-series Скачать руководство пользователя страница 20

Delivery and subsequent transportation of the equipment:

The customer

should prepare his environment to accept the new product based on the installation
planning information provided, with assistance from an IBM Installation Planning
Representative (IPR) or IBM authorized service provider. In anticipation of the
equipment delivery, the final installation site should be prepared in advance such
that professional movers/riggers can transport the equipment to the final installation
site within the computer room. If for some reason, this is not possible at the time of
delivery, the customer will need to make arrangements to have professional
movers/riggers return to finish the transportation at a later date. Only professional
movers/riggers should transport the equipment. The IBM authorized service provider
will only perform minimal frame repositioning within the computer room, as needed,
to perform required service actions. The customer is also responsible for using
professional movers/riggers in the case of equipment relocation or disposal.

>

(>

)

500 lbs.

227 kg.

a69i0333

DANGER

Heavy equipment—personal injury or equipment damage might
result if mishandled. (D006)

Safety labels

As an added precaution, safety labels are often installed directly on products or
product components to warn of potential hazards. These can be either danger or
caution notices, depending upon the level of the hazard.

The actual product safety labels may differ from these sample safety labels:

DANGER

Hazardous voltage, current, or energy levels are present inside
any component that has this label attached. Do not open any
cover or barrier that contains this label. (L001)

DANGER

Rack-mounted devices are not to be used as a shelf or work
space. (L002)

DANGER

Multiple power cords. The product might be equipped with
multiple power cords. To remove all hazardous voltages,
disconnect all power cords. (L003)

xviii

Ethernet Switch s-series Installation and User Guide

«
...
18
19
20
21
22
...
»

Содержание s-series











































































































































































Отзывы:

Нет отзывов