IBM s-series, Инструкция по установке и эксплуатации, Страница: 57 / 170

3. Mount the chassis that goes in the lowest position in the rack, as shown in
Figure 18. With two or more people lifting the chassis, slip the wide portion of
each keyhole slot over the corresponding screw in the rack.
4. Slide the chassis down so that the screw heads are in the narrow portion of the
keyhole slots.
5. Install the remaining two mounting screws through the opposite corners of the
brackets into the rack.
6. Tighten all screws to secure the chassis in place.
7. Repeat the steps to mount each subsequent chassis in the same rack.
Select holes i n r a ck th a t m a tch the
keyholes i n mount i ng br a ckets
( i n th i s c a se, the top for the
left-h a nd br a cket a nd the bottom
for the r i ght-h a nd br a cket)
net
0
8bs
0
28
Figure 17. Positioning two of four mounting screws in a rack.
net 0 8bs 0 2 9
Figure 18. Front-mount-rack-installation into chassis
Chapter 3. Installing the Chassis
31