IBM Nways 2216, Руководство по обслуживанию и ремонту

Страница: 86 / 168

Using the Command Line Interface Operational Diagnostics
The following example shows how to access the IBM 2216 diagnostics through the
command line interface:
1
At the asterisk (*), type diags and press Enter.
2
The Diagnostic Menu appears (Figure 5-1). To make your selection, type in
the number of your choice and press Enter.
‡@ —
DIAGNOSTIC MENU
Select from the following list of functions:
<1. The Device List>
shows operational and diagnostic status for each of the installed devices.
From this page you can also link to the Device Status and Control page
for each adapter.
<2. The Diagnostic Test History Log>
contains a summary of recent diagnostic testing activity.
<3. The Diagnostic Error Log>
contains error information for recent diagnostic tests that have
detected errors.
First time users should review the <4.Introduction> to using the diagnostics.
Select (1-4 or E=Exit Diagnostics):
ˆ ˜
Figure 5-1. Operational Diagnostics Main Menu
3
Select
<
1. The Device List
>
to view a list of installed devices. (Status and
test options for each device are from the Device List page.) The Device
Status and Control panel (similar to the one in Figure 5-2 on page 5-3)
appears.
5-2
2216 Maintenance Manual