IBM Nways 2216, Руководство по обслуживанию и ремонту

Страница: 68 / 168

Using the Utilities
To use the utilities:
1
Select 4. Utilities from the main menu.
2
A menu listing the available utilities is displayed (Figure 4-6).
‡@ —
Nways System Firmware
Version 1.0
(C) Copyright IBM Corporation, 1996 All Rights Reserved.
System Management Utilities
Select one:
1. Set Power-On Password
2. Set Supervisory Password
3. Enable Unattended Start Mode
4. Disable Unattended Start Mode
5. Remove Power-On Password
6. Remove Supervisory Password
7. Update System Firmware
8. Display Error Log
9. View or Set Vital Product Data
10. Manipulate Dead Man Timer
11. Remote Initial Program Load Setup
12. Change Management
13. Prepare Hard Disk
Enter
- Esc=Quit - F1=Help -
----------- -------------- -------------
ˆ ˜
Figure 4-6. Utilities Selection Panel
3
Make your selection. You will be prompted for additional information, and
messages are displayed to indicate that the task was performed.
4-8
2216 Maintenance Manual