IBM Nways 2216, Руководство по обслуживанию и ремонту

Страница: 73 / 168

Removing the Supervisory Password
The use of a supervisory password allows you a degree of security by preventing
unauthorized access to the IBM 2216. However, removing the enforcement of the
password could be a convenience while servicing the IBM 2216.
Note: This function can be performed only if done immediately after switching the
power on.
1
Select 6. Remove Supervisory Password from the utilities panel.
2
The Remove Supervisory Password panel is displayed (Figure 4-11).
‡@ —
Nways System Firmware
Version 1.0
(C) Copyright IBM Corporation, 1996 All Rights Reserved.
System Management Utilities
Select one:
1. Set Power-On Password
2. Set Supervisory Password
3. Enable -------Remove Supervisory Password--------+
4. Disable Unatte|
|
5. Remove Power-O| Do you want to remove the |
6. Remove Supervi| Supervisory password? |
7. Update System | |
8. Display Error | Yes - No - |
9. View or Set Vi| ------- ------- |
10. Manipulate Dea+------------------------------------------+
11. Remote Initial Program Load Setup
12. Change Management
13. Prepare Hard Disk
Enter - Esc=Quit - F1=Help -
----------- -------------- -------------
ˆ ˜
Figure 4-11. Remove Supervisory Password Panel
3
Select Yes if you want to remove the supervisory password. Press Enter.
4
The Password Removed panel is displayed. This panel informs you that the
supervisory password has been removed.
Chapter 4. Using 2216 Firmware
4-13