IBM Nways 2216, Руководство по обслуживанию и ремонту

Страница: 74 / 168

Updating System Firmware
Use this utility to update the IBM 2216 firmware. Only full images of the firmware
are shipped; therefore, when you select this option you completely replace the
previous level of firmware.
1
Select 7. Update System Firmware from the utilities panel.
2
The System Firmware Update panel is displayed (Figure 4-12).
‡@ —
Nways System Firmware
Version 1.0
(C) Copyright IBM Corporation, 1996 All Rights Reserved.
System Management Utilities
Select one:
1. Set Power-On Password
2. Set Supervisory Password
3. Enable Unattended Start Mode
4. Disable Unattended Start Mode
5. Remove Power-O+----------F/W Update Options--------------+
6. Remove Supervi|
|
7. Update System | 1. TFTP a Remote Image File |
8. Display Error | 2. XMODEM a Remote Image File |
9. View or Set Vi| 3. Use a Local Image File |
10. Manipulate Dea| |
11. Remote Initial| Enter - Esc=Quit - F-1=Help |
12. Change Managem| ------- --------- ------------------|
13. Prepare Hard D+------------------------------------------+
Enter - Esc=Quit - F1=Help -
----------- -------------- -------------
ˆ ˜
Figure 4-12. System Firmware Update Panel
Attention: Do not power off the IBM 2216 during the process of updating
the firmware. If the update fails, the IBM 2216 will boot a backup firmware
image. If this happens, repeat the update procedure to reload the onboard
firmware image.
3
Select the option that you want to use from those listed. For TFTP, you will
be prompted for a local (the “to”) and a remote (the “from”) file names that
you want use (and the name of the server that can be reached by the IBM
2216). In addition, you will be prompted to create a recovery image and a
file name from which to update the firmware.
TFTP will not function with a slip interface.
The firmware update process begins. It informs you that the system firmware
has been updated.
4-14
2216 Maintenance Manual