10. Select ADDRESS DRV1 from the Edit Configuration Menu and press Enter.
11. Select the SCSI address for tape drive 1 and press Enter. For connection to AS/400, SCSI
address 0 is recommended. After making your choice, Select CANCEL and press ENTER to
return to the Edit Configuration Menu.
Note: Select the SCSI address previously recorded by following the instructions and checklist in
|
“Before You Begin” on page INST-5. Remember, in a dual drive model, the SCSI
|
addresses for the two drives must be unique if both drives are attached to the same host
|
initiator. If the drives will be attached to different host initiators, then the SCSI address may
|
be either unique or the same.
12. Select AUTO CLEAN from the Edit Configuration Menu and press Enter.
13. An asterisk (*) in front of ENABLE or DISABLE indicates if automatic cleaning is enabled or
disabled. The default setting is ENABLED. If the display shows *ENABLE, the library unit will
automatically clean the tape drive(s) when they require cleaning. If the display shows *DISABLE,
the operator must take action to clean the tape drive(s) when cleaning is required.
To keep the current configuration, select CANCEL and press Enter. To change the configuration,
move the arrow to select the desired configuration (ENABLE or DISABLE) and press Enter. After
making your choice, Select CANCEL and press ENTER to return to the Edit Configuration Menu.
14. Select CANCEL from the Edit Configuration Menu and press Enter.
|
15. If a 3570 Tape Subsystem Model C01, C11 or C21 is being installed, skip to step 29 on
|
page INST-45.
16. If * UNLOAD DRIVE is displayed, there is no cartridge in the drive. If UNLOAD DRIVE (without an
asterisk) is displayed, there is a cartridge in the drive. The UNLOAD DRIVE option on line 3
pertains to drive 1 and the UNLOAD DRIVE option on line 4 pertains to drive 2.
If a cartridge is loaded in drive 1 or drive 2, select UNLOAD DRIVE from the Unload and Reset
Menu and press Enter; otherwise continue with step 19.
17. The cartridge will be unloaded from the drive and the status screen will be displayed. Press Enter
to return to the Unload and Reset Menu.
18. Repeat step 17 until there are no cartridges loaded in drive 1 or drive 2.
19. Select RESET DRIVE and press Enter, then select PROCEED and press Enter. This will activiate
changes.
20. The 3570 will reset, run power-on diagnostics, and check the magazine cells to determine if
cartridges are present. The reset is complete when all movement in the library has stopped and
the hour-glass symbols for each of the magazine cells has been replaced with a solid block, an
open block, or a dash. When the reset is complete, press Enter to return to the Options Menu.
21. Select SET LIBR MODE from the Options Menu. and press Enter.
22. Select DRIVE 1 and press Enter.
23. See “Library Modes of Operation” on page LIBRARY-5.
Note: If the 3570 is configured to operate in Base Configuration, it is recommended to select the
Random Mode of operation. Drive 2 is not used when the 3570 is set in Base
Configuration and Manual or Automatic Mode of operation.
Select the desired mode of operation (MANUAL, AUTOMATIC, or RANDOM) for tape drive 1 and
press Enter.
24. If the 3570 is configured to operate in Base Configuration, continue with step 27 on page INST-45.
25. Select DRIVE 2 and press Enter.
INST-44
IBM 3570 MI
Содержание Magstar MP 3570 C Series
