IBM eServer 342 xSeries, Руководство пользователя

Страница: 116 / 160

102
IBM xSeries 342: User’s Reference
Identifying problems using LEDs
Your server has LEDs to help you identify problems with some server components.
These LEDs are part of the Light Path Diagnostics feature built into the server. By
following the
path of lights , you can identify the type of system error that occurred.
See the following sections for more information.
415 Analog/digital
modem Not
applicable No modem was detected 1. Verify that the modem is
properly attached to the
server.
2. If the problem remains,
replace the modem.
If the problem persists, call for
service.
PCI modem detected but not enabled 1. Change the configuration to
enable the modem.
2. If the problem remains,
replace the modem.
If the problem persists, call for
service.
Failed Modem reset failed Replace the modem.
If the problem persists, call for
service.
No dialtone detected 1. Make sure that the phone
line attached to the modem
has a dial tone. (Connect a
phone to the line and listen,
if necessary.) If there is no
tone, have the phone line
serviced.
2. If the problem remains,
replace the modem.
If the problem persists, call for
service.
Code Function Result Text message Action
Table 14. Diagnostic error messages.