IBM eServer 342 xSeries, Руководство пользователя

Страница: 111 / 160

Chapter 6. Solving problems
97
35 ServeRAID Aborted Test setup error: No ServeRAID
adapter found on system board or PCI
bus Make sure the ServeRAID
adapter is properly installed.
If the problem remains, replace
the ServeRAID adapter.
If the problem persists, call for
service.
Failed Adapter in slot n ; adapter/drive
configuration error
(where n is the slot number of the
failing adapter)
Run the ServeRAID
Configuration Utility.
If the problem remains, replace
the ServeRAID adapter in slot
n .
If the problem persists, call for
service.
Adapter in slot n ; internal error
(where n is the slot number of the
failing adapter)
Logical drive m on adapter in slot n
(where m is the number of the failing
logical drive and n is the slot number
of the adapter)
On system board; internal error Run the ServeRAID
Configuration Utility.
If the problem persists, call for
service.
On system board; adapter/drive
configuration error
Logical drive on system board adapter
Adapter in slot n ; memory allocation
error
(where n is the slot number of the
failing adapter)
Call for service.
On system board; memory allocation
error
On system board; PCI configuration
error
On system board; POST error
Adapter in slot n ; POST error
(where n is the slot number of the
failing adapter)
Replace the ServeRAID
adapter in slot
n . If the problem
persists, call for service.
Adapter in slot n ; PCI configuration
error
(where n is the slot number of the
failing adapter)
SCSI drive on adapter in slot n, SCSI
ID m
(where n is the slot number of the
adapter and m is the SCSI ID of the
drive)
Check the cable and power
connections on the drive. If the
problem persists, call for
service.
075 Power supply Failed Voltage sensed by the system is out
of range Call for service.
Code Function Result Text message Action
Table 14. Diagnostic error messages.