IBM eServer 342 xSeries, Руководство пользователя

Страница: 80 / 160

66
IBM xSeries 342: User’s Reference
Installing the server cover and bezel
Install ing the server cover and tri m bezel Note: The illustrations in this document might differ slightly from your hardware.
To install the server cover:
1. Place the cover-release latch in the open (up) position and align the flanges on
the left and right sides of the cover with the slots on the server chassis.
2. Close the cover-release latch.
To install the bezel:
1. Align the hooks on the bottom of the trim bezel to the server.
2. Press inward on the top sides of the bezel, and press the bezel toward the server
until it clicks into place.
To complete the installation:
• Reinstall the server in the rack.
• If you disconnected any cables from the back of the server, reconnect the cables;
then, plug the power cords into properly grounded electrical outlets.
Connecting external options
Connecti ng exte rnal op tions If you install a SCSI adapter, you can attach a SCSI storage expansion enclosure to
your server. You can attach additional external options to the input/output ports on the
rear of the server. See “Input/output ports” on page 67 for additional information.
To attach an external device:
1. Read “Before you begin” on page 35 and the documentation that comes with your
options.
2. Turn off the server and all attached devices.
3. Follow the instructions that come with the option to prepare it for installation and
to connect it to the server.
Note: If you are attaching an external SCSI device, see “SCSI cabling requirements”
on page 76 and “Setting SCSI IDs” on page 76.
Cover-release latch
Side latch
Side latch
Bezel