IBM eServer 342 xSeries, Руководство пользователя

Страница: 108 / 160

94
IBM xSeries 342: User’s Reference
fff-ttt-iii-date-cc-text message
where:
fff is the three-digit function code that indicates the function being
tested when the error occurred. For example, function code 089
is for the microprocessor.
ttt is the three-digit failure code that indicates the exact test failure
that was encountered. (These codes are for trained service
personnel and are described in the
Hardware Maintenance
Manual .)
iii is the three-digit device ID. (These codes are for trained service
personnel and are described in the
Hardware Maintenance
Manual .)
date is the date that the diagnostic test was run and the error
recorded.
cc is the check value that is used to verify the validity of the
information.
text message is the diagnostic message that indicates the reason for the
problem.
Text messages
The diagnostic text message format is as follows:
Function Name: Result (test specific string)
where:
Function Name
is the name of the function being tested when the error occurred. This
corresponds to the function code (fff) given in the previous list.
Result can be one of the following:
Passed This result occurs when the diagnostic test
completes without any errors.
Failed This result occurs when the diagnostic test
discovers an error.
User Aborted This result occurs when you stop the
diagnostic test before it is complete.
Not Applicable This result occurs when you specify a
diagnostic test for a device that is not
present.
Aborted This result occurs when the test could not
proceed because of the system
configuration.
Warning This result occurs when a possible problem
is reported during the diagnostic test, such
as when a device that is to be tested is not
installed.
Test Specific String This is additional information that you can
use to analyze the problem.