IBM eServer 342 xSeries, Руководство пользователя

Страница: 75 / 160

Chapter 5. Installing Options
61
Make sure the fan sink guide fits between the processor and the processor
socket.
11. Press down and latch the spring retention clip on the back of the fan sink (the side
facing the back of the server).
12. Press down and latch the spring retention clip on the front of the fan sink (the side
facing the front of the server).
13. Plug the fan sink into the fan sink connector on the system board (J45). Make
sure the cable is not in a position to interfere with the fan sink operation or the
installation of the air baffle.
14. Reinstall the air baffle. Make sure the sides of the air baffle fit inside the brackets
on the server.
15. Reinstall the fan 3 assembly and make sure that the connector engages.
16. If you have other options to install or remove, do so now; otherwise, go to
“Installing the server cover and bezel” on page 66.
Fan sink
(Remove thermal tape
liner on installation)
Ensure correct alignment
of fan sink, mounting clip,
and mounting socket
Microprocessor
release lever
Spring retention clip
Fan sink guide