IBM 866011U - Netfinity 5500 - 8660, Руководство по техническому обслуживанию аппаратной части

Страница: 389 / 402

Note
The default jumper position of J32 and the
jumper extension cable is a jumper on pins
1 and 2. Refer to the “Hardware
Information” section of the
IBM Netfinity
5500 M20 Server Library for a description of
the jumper.
d. Route the jumper extension cable along the
system board and the shuttle side wall.
6. Replace the processor housing guide:
a. Remove the screws that secure the processor
housing guide and remove the guide.
b. Install the processor housing guide
.1/
that
comes with this option and secure with screws
.2/
.
7. Replace the fan assembly and press on the fasteners
to lock in place.
8. Replace the processor housing top cover and press
on the fasteners to lock in place.
9. Align the shuttle with the guides and slide the shuttle
partially into the server.
10. Reconnect the cables to the shuttle that you
disconnected in step 14 on page 368.
11. Reconnect the power cables that you disconnected in
step 3 on page 370.
12. Grasp the handles on the processor housing top
cover and lift the housing.
13. Orient the processor housing with the cable
connectors toward the front of the server.
4-way Xeon upgrade installation
381