IBM 866011U - Netfinity 5500 - 8660, Руководство по техническому обслуживанию аппаратной части

Страница: 40 / 402

A screen similar to the following appears.
Select Ready Drives
Select 1 or more RDY (Ready)
drives that will be used to
create the new array
OK
Cancel
2. Select one or more Ready (RDY) drives for the new
disk array.
To select a RDY drive, click on the desired RDY
button from the device area. A disk array identifier
appears beside each RDY drive added to the disk
array.
If you change your mind about a selected drive,
select the button again to remove the selected drive
from the disk array.
3. Click on OK to define a logical drive for the new
array.
A screen similar to the following appears.
Create Logical Drive
Array
ID
Free
Space MB)
Raid
Level
Requested
Space
OK
Cancel
2150 2150 C 0
4. Select the RAID level that you want to assign to the
logical drive from the pull-down list.
The RAID levels available depend on the number of
hard disk drives that you select for the disk array.
Ÿ
If you have one hard disk drive, the logical drive
can be only RAID level 0.
Ÿ
If you have two or more hard disk drives, the
logical drive can be RAID level 0 or 1.
Ÿ
If you have three or more hard disk drives, the
logical drive can be RAID level 0, 1, or 5.
5. Type the size, in megabytes, that you want to assign
to the logical drive in the Requested Space entry
field.
32
Netfinity Server HMM