To define a RDY drive as a hot-spare drive:
1. Start the ServeRAID Configuration program (see
“Starting the ServeRAID Configuration program” on
page 77).
2. Select Create/Delete/Copy Log Drive from the Main
Menu; then, press Enter.
3. Select Define/Undefine Hot Spare Drive from the
next menu; then, press Enter.
4. Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to
highlight the RDY drive that you want to define as the
hot spare (HSP); then, press Enter.
The drive state changes from RDY to HSP. You can
press Enter to toggle between the HSP and RDY
states.
5. Press Esc to make the change; then, press Esc
again to return to the Main Menu.
6. To enable or disable the hot-swap rebuild parameter,
continue with “Enabling or disabling hot-swap
rebuild.”
7. Back up the disk-array configuration information to
diskette. See “Backing up the disk-array
configuration” on page 126 for instructions.
Enabling or disabling hot-swap rebuild:
The
default setting for the hot-swap rebuild parameter is
Disable. When you set the hot-swap rebuild parameter to
Enable, the ServeRAID controller can automatically rebuild
a defunct (DDD) drive when you replace it.
The ServeRAID controller will rebuild a defunct drive
automatically when all of the following conditions exist:
The hot-swap rebuild parameter is set to Enable.
The defunct drive is part of a RAID level 1 or RAID
level 5 logical drive.
The capacity of the replacement drive is equal to or
greater than the capacity of the defunct drive.
No rebuild, synchronization, or RAID level change
operation is in progress.
When these requirements are met, the ServeRAID
controller automatically initiates a rebuild of the drive
without user intervention.
To enable or disable hot-swap rebuild:
1. Start the ServeRAID configuration program (see
“Starting the ServeRAID Configuration program” on
page 77).
2. Select Advanced Functions from the Main Menu;
then, press Enter.
3. Select Display/Change Adapter Parameters from
the next menu; then, press Enter.
4. Select Enable/Disable Hot-Swap Rebuild; then,
press Enter.
112
Netfinity Server HMM
Содержание 866011U - Netfinity 5500 - 8660
