IBM 866011U - Netfinity 5500 - 8660, Руководство по техническому обслуживанию аппаратной части

Страница: 45 / 402

is running. If a defective sector is found, it is automatically
repaired. As a result, you no longer have to synchronize
RAID level 1 and RAID level 5 logical drives on a weekly
basis.
Synchronizing a logical drive verifies that the data
redundancy for the logical drive is correct. For RAID
level 5, the parity bit is computed and then written to the
parity drive.
To synchronize a logical drive:
1. Select the logical drive that you want to synchronize
from the Main Screen of the Administration and
Monitoring utility program.
A screen similar to the following appears.
Logical Drive Information
Logical Drive Number 1
Blocked No
Part of Array A
Part of Merge Group 1
Date Created 05/19/97
State OKY
Size 100MB
RAID Level 0
Write Policy WT
Read Ahead On
Strip Unit Size 8 KB
Number of Chunks 3
Stripe Order 1,1 1,2 1,4
Unblock Initialize Synchronize OK
2. Click on Synchronize to synchronize the drive.
The synchronization process begins and reports
progress information on the screen.
Adapter 1 Synchronization Progress
Log Drv 0
Log Drv 1
Log Drv 2
Log Drv 3
Log Drv 4
Log Drv 5
Log Drv 6
Log Drv 7
53%
Note
Only one synchronization command can be
active at a time.
Netfinity 5500 - Type 8660
37