IBM 866011U - Netfinity 5500 - 8660, Руководство по техническому обслуживанию аппаратной части

Страница: 36 / 402

Ÿ
Alert Options
Network settings:
If you want to monitor ServeRAID
controllers across a network, you must switch to the
client/server mode.
To select and connect to a server:
1. Click on the icon on the tool bar or select
Network Settings from the Options pull-down menu.
A screen similar to the following appears.
Network Settings
Stand-alone
Client/Server
Client/Server Settings
ServeRAID
User Name:
Host Name: Port Number (Optional)
ips: 1087
TCP/IP
Password
Add Delete
Cancel
Connect
* * * * * * *
2. Select the Client/Server radio button.
3. If security is enabled on the server to which you are
connecting, type in the User Name and Password as
defined by the security file on the server to which you
are connecting. (See “Server security file” on
page 24 for information about the security file).
4. Type in either the Hostname or the TCP/IP Address
of the system, or select them from the pull-down list.
Note
If the server was started on any port other than
the default (1087), type in a colon and the correct
port number for the configuration (for example:
ServeRAID:1088) after the Hostname or TCP/IP
Address that you just entered.
You can use the Network Settings dialog box
to select and connect to servers in the
network that have an IBM ServeRAID
controller installed.
28
Netfinity Server HMM