IBM 866011U - Netfinity 5500 - 8660, Руководство по техническому обслуживанию аппаратной части

Страница: 164 / 402

Installing the trim bezels and server door:
Refer to the following illustration while you perform the
steps in this procedure.
To install the media-bay trim bezel:
1. Insert the two tabs on the top of the media-bay trim
bezel
.3/
in the matching holes on the server
chassis.
2. Push the bottom of the bezel toward the server until
the two tabs at the bottom of the bezel snap into
place.
To install the NetBAY3 bezel:
1. Hook the tabs on the left side of the NetBAY3 bezel
.2/
around the posts on the NetBAY3.
2. Gently push the right side of the bezel toward the
server until the bezel snaps into place.
3. Lock the NetBAY3 bezel.
To install the server front door:
1. Align the pins on the server door
.1/
with the hinges
on the server and slide the door down.
2. Close and lock the door.
Updating device records and reconfiguring
the server:
When you start the server for the first time
after you add or remove an internal option or an external
SCSI device, you might see a message telling you that the
configuration has changed.
156
Netfinity Server HMM