IBM 866011U - Netfinity 5500 - 8660, Руководство по техническому обслуживанию аппаратной части

Страница: 56 / 402

Using the ServeRAID monitoring
functions:
This section contains instructions for using
the ServeRAID Administration and Monitoring utility
program to monitor the ServeRAID controller status
information, event logs, logical drive information, and
physical device information.
Monitoring status information:
You can monitor the
ServeRAID controller status by clicking on the active
ServeRAID controller button on the Main Screen of the
Administration and Monitoring utility program. The
currently active ServeRAID controller button is indicated by
a green or red light. (Green indicates an active controller;
red indicates that the controller is not responding.)
If there is more than one ServeRAID controller in the
system, click on the appropriate button to make it active.
A screen similar to the following appears.
Adapter Information
Adapter Number 1
Number of Logical Drives 6
Unattended Mode Off
Code Block Version 97125
Boot Block Version 96340
Concurrent Commands 64
Maximum Devices Supported 45
Flash Program Count 2650
Defunct Disk Count 0
Rebuild Rate High
Hot-Swap Rebuild Disabled
Offline Logical Drive Count 0
Soft Event Log Hard Event Log Device Event Log
OK
Descriptions of the information that appears on the screen
are as follows.
Note
You might have to scroll down, using the scroll bar, to
see all of the items that appear on this screen.
Adapter Number The active ServeRAID controller (1 to 8).
Number of Logical
Drives The number of defined logical drives (0 to
8).
48
Netfinity Server HMM