IBM 866011U - Netfinity 5500 - 8660, Руководство по техническому обслуживанию аппаратной части

Страница: 97 / 402

Using the Advanced Configuration
functions
The Advanced Functions choice allows you to initialize the
configuration (reset the ServeRAID controller settings),
import the configuration information from the drives, enable
and disable the Boot CD-ROM and INT13 extensions, and
view the controller and PCI information.
When you select Advanced Functions from the Main Menu,
a screen similar to the following appears.
Select a choice using the Up and Down Arrow keys, then press Enter.
IBM ServeRAID Adapter Disk Array Mini-Configuration Ver. X.XX
Advanced Functions
Initialize Configuration
Import Configuration from Drive(s)
Configure BIOS Settings
Adapter and PCI Information
Exit
Descriptions of the choices available from the Advanced
Functions menu are as follows:
Attention
The following choices might result in loss of data
due to changes in the configuration.
Ÿ
Initialize Configuration resets the ServeRAID
controller settings to their factory defaults and sets all
functional hard disk drives to the RDY state.
Ÿ
Import Configuration from Drive(s) reads the most
common configuration information from the drives in
the server and copies it to the controller’s NVRAM
and to the controller’s EEPROM module.
Ÿ
Boot CD-ROM and INT13 Extensions is used to
configure the BootCd feature. When BootCd is
enabled, the ServeRAID controller attempts to start
(boot) from a CD, if the CD-ROM drive contains a
startable (boot-enabled) CD, and no other controller is
currently using INT13 extensions.
Attention:
Only one controller can support INT13 extensions.
Ÿ
Adapter and PCI Information displays the
ServeRAID controller hardware and PCI register
information, as shown in the following example
screen.
Netfinity 5500 - Type 8660
89