Replace the Christie IMB-S2 Instruction Sheet
1
020-101329-02 Rev. 1 (06-2015)
Replace the Christie IMB-S2
Instruction Sheet
This document provides instructions for removing and replacing the Christie IMB-S2 in Solaria One
and Solaria One
+
projectors.
Safety Precautions
Prerequisites
• Christie IMB-S2 replacement kit (P/N:003-103110-XX or 004-103110-XX) that includes these
items:
• Christie IMB-S2
• Replacement anti-tamper label
Back Up Projector Settings
Service permissions are required to complete this procedure.
1. On the projector touch panel controller (TPC), tap
Menu
>
Christie IMB
>
System
.
2. Tap
General
>
Backup/Restore
.
3. Tap
Backup
.
4. Enter a name for the backup file.
5. Tap
Enter
.
6. Tap
OK
.
ELECTRICAL SHOCK HAZARD! Always turn off, disconnect, and disengage all power sources
to the projector before servicing. Failure to comply results in death or serious injury.
Only Christie accredited service technicians are permitted to open any enclosure on the
projector and only if the AC power has been fully disconnected. Failure to comply could
result in minor or moderate injury.
When removing or installing the Christie IMB, wear an anti-static wrist strap and follow anti-
static protocols. Failure to comply could result in equipment or property damage.
