Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax: +49 (5281) 9309-30
http://www.meinberg.de
[email protected]
LANTIME M600/GPS: High End NTP Time Server with integrated GPS radio
clock
[1]The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any
size. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio
clock as its reference time source. A highly stable and precise oscillator is capable of bridging interferences
or a temporary loss of reception. The standard M600 model already offers a broad range of interfaces and
can be customized to meet the special requirements of your application.
Important note
Produktgruppe
Key Features
- Synchronization of NTP and SNTP compatible clients
- Web based status and configuration interface [2]
(Demo)
and console based graphical configuration
utility
- Supported networking protocols: IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP,
SYSLOG, SNMP
- Alert-Notification system of status change by Email, WinMail, SNMP or an external connected display
- Full SNMP v1,v2,v3 support with own SNMP-daemon for status and configuration and SNMP Trap
messages
- USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of
configuration and log files
- Antenna connected with up to 300m of standard coaxial cable RG58
- Four independant RJ-45 ethernet interfaces 10/100 MBit
rev 2013.0704.1631
lantime-m600-gps
Page 1/6
