IBM 865951Y - Netfinity 5000 - 51Y, Руководство по техническому обслуживанию аппаратной части

Страница: 91 / 220

.4/
CD-ROM Eject Button: Press this button to
release a CD from the CD-ROM drive.
Note
If the CD-ROM tray does not extend out, insert
the end of a straightened paper clip into the
manual tray-release opening and gently pull the
tray open.
.5/
Reset Button: Press this button to reset the
server.
.6/
Power-on switch: Use this switch to turn on the
server, or to return the server to
Standby mode
(power is present but the server is not turned on).
Important
After you plug the server power cord into an
outlet, wait 20 seconds before pressing the
power switch. (During this time, the
system-management processor is initializing
and the power-on switch does not respond.)
Caution
The Power-On button on the front of the server
does not turn off the electrical current supplied
to the server. The server also might have
more than one power cord. To remove all
electrical current from the server, ensure that
all power cords are disconnected from the
power source.
The automatic restart feature, which enables the
server to restart following a momentary power loss,
means that the server is never completely turned
off. Do not set the server to the Standby mode if
any drive in-use light is on. This might damage the
information stored on a hard disk drive or on a
diskette. A Power-On Switch protector, which
prevents the Power-On Switch from being pushed
accidentally, is shipped with the server.
To toggle the server between Standby mode and
actively running, press and release the Power-On
Switch.
.7/
Side-Cover Release Lever: Use this lever to
release the left-side cover.
.8/
CD-ROM Drive In-Use Light: This light comes on
when the CD-ROM drive is accessed.
Netfinity 5000 - Type 8659
83