IBM 865951Y - Netfinity 5000 - 51Y, Руководство по техническому обслуживанию аппаратной части

Страница: 70 / 220

To replace the battery:
1. Unplug the server.
2. Locate the battery on the system board (see “System
board illustration” on page 142).
3. Remove the battery:
a. Use one finger to lift the battery clip over the
battery.
b. Use one finger to slightly slide the battery toward
the front of the server. The spring mechanism
behind the battery will push it out toward you as
you slide it forward.
c. Use your thumb and index finger to pull the
battery from under the battery clip.
d. Ensure that the battery clip is touching the base
of the battery socket by pressing gently on the
clip.
4. Insert the new battery:
a. Tilt the battery so that you can insert it into the
front of the socket, under the battery clip.
b. As you slide it under the battery clip, press the
battery down into the socket.
5. Reinstall the server covers and complete the
installation (see “Completing the installation” on
page 77).
6. Start the Configuration/Setup Utility program and
reset configuration parameters as needed.
Ÿ
To reset the system date and time, go to “Date
and time” on page 24.
Ÿ
To reset the power-on password, go to “Using
the power-on password menu” on page 26.
62
Netfinity Server HMM