IBM 865951Y - Netfinity 5000 - 51Y, Руководство по техническому обслуживанию аппаратной части

Страница: 36 / 220

3. Move the cursor to the Enter Administrator
Password Again data field and type the password
again.
Note
A message appears if the two passwords do not
match. If this happens, press Enter to return to
the Administrator Password menu.
4. Select Change Administrator Password to save the
new password; then, press Enter. The password
becomes effective immediately.
To delete an administrator password:
1. Select Administrator Password from the System
Security menu; then, press Enter.
2. Select Delete Administrator Password; then, press
Enter.
3. A confirmation window appears. Press Enter to
delete the administrator password. Press Esc to
return to the System Security menu.
To enable a user to change the power-on password:
1. Select Administrator Password from the System
Security menu; then, press Enter.
2. Select Power-on password changeable by user.
Press the Left Arrow (
←
) or Right Arrow (
→
) key to
toggle the entry to Yes.
When this choice is enabled, System Security appears on
the limited Configuration/Setup menu. The System
Security menu contains the Power-on Password choice.
Defining a system owner's name:
You can specify
a system owner's name that displays during POST each
time that the server is started. If you set an administrator
password, only the administrator can set, change, or delete
the system owner's name.
To set the system owner's name:
1. Select System Owners Name from the System
Security menu; then, press Enter.
The System Owners Name screen appears.
2. Type the name in the Enter System Owners Name
String data field. You can use any combination of up
to 15 characters and spaces in the system owner's
name.
3. Press the Down Arrow (
↓
) key to select the Set or
Change System Owners Name data field.
4. Press Enter to set the name or change a previously
defined name.
To delete the system owner's name, select Delete Stored
System Owners Name; then, press Enter.
28
Netfinity Server HMM