IBM 865951Y - Netfinity 5000 - 51Y, Руководство по техническому обслуживанию аппаратной части

Страница: 117 / 220

4. Press the safety latches and slide the rack model
about halfway into the rack enclosure.
5. Attach the cable-management arm to the cable-arm
bracket, using two long (M6 by 16 mm) screws.
6. If you have not done so already, attach the
cable-management arm to the rack as described in
steps 5a on page 107 and 5b on page 107.
7. Attach the monitor, keyboard, and power cables to
the corresponding connectors on the server. Refer to
the rack enclosure documentation for instructions.
8. Attach the cables to the cable-management arm using
the cable ties provided.
Note
Be sure to route the cables above the top edge
or below the bottom edge of the
cable-management arm, to avoid overstressing
the cables.
Netfinity 5000 - Type 8659
109