IBM 865951Y - Netfinity 5000 - 51Y, Руководство по техническому обслуживанию аппаратной части

Страница: 35 / 220

the power-on password as described in steps 1
through 5 above.
5. Turn the server off again.
6. Set switch 8 back to Off.
7. Restart the server.
To delete a power-on password:
1. Select Power-on Password from the System
Security menu; then, press Enter.
The Power-on Password menu appears.
2. Select Delete Power-on Password; then, press
Enter.
3. A confirmation window appears. Press Enter to
delete the power-on password. Press Esc to cancel
the request and return to the System Security menu.
To allow the server to start in unattended mode when
a power-on password is set:
Note
If the password data field is set to On, the
Unattended Start and Stop modes are not
supported.
1. Select Power-on Password from the System
Security menu; then, press Enter.
The Power-on Password menu appears.
2. Select Allow for unattended boot with password.
Press the Left Arrow (
←
) or Right Arrow (
→
) key to
toggle the entry to On.
If no power-on password is set on the server, this option
has no effect.
Using the administrator password menu:
The
administrator password (sometimes called a
supervisor-level password) controls access to some
features of the server, including the Configuration/Setup
Utility program.
Important
If an administrator password is set and then forgotten,
it cannot be overridden or removed. You must replace
the system board.
To set an administrator password:
1. Select Administrator Password from the System
Security menu; then, press Enter.
2. Type the password in the Enter Administrator
Password data field.
A password can contain any combination of up to
seven alphanumeric characters (A–Z, a–z, and 0–9).
Keep a record of the password in a secure place.
Netfinity 5000 - Type 8659
27