IBM 865951Y - Netfinity 5000 - 51Y, Руководство по техническому обслуживанию аппаратной части

Страница: 160 / 220

Symptom-to-FRU index
This index supports Netfinity 5000 - Type 8659 servers.
Notes
1. Check the configuration before you replace a
FRU. Configuration problems can cause false
errors and symptoms.
2. For IBM devices not supported by index, refer to
the manual for that device.
3. Always start with “General Checkout” on page 5.
The Symptom-to-FRU lists symptoms, errors, and the
possible causes. The most likely cause is listed first. Use
this Symptom-to-FRU Index to help you decide which
FRUs to have available when servicing the computer. The
POST BIOS displays POST error codes and messages on
the screen.
Beep symptoms
Beep symptoms are short tones or a series of short tones
separated by pauses (intervals without sound). See the
following examples.
Note
One beep after successfully completing POST
indicated the system is functioning properly.
Beeps Description
1-2-3
Ÿ
One beep
Ÿ
A pause (or break)
Ÿ
Two beeps
Ÿ
A pause (or break)
Ÿ
Three beeps
4 Four continuous beeps
Beep/Symptom FRU/Action
1-1-2
(Processor register test
failed) 1. Optional Processor
(if installed)
2. Processor
1-1-3
(CMOS write/read test
failed) 1. Battery
2. System Board
1-1-4
(BIOS EEPROM checksum
failed) 1. DIMM
2. System Board
1-2-1
(Programmable Interval
Timer failed) 1. System Board
1-2-2
(DMA initialization failed) 1. System Board
152
Netfinity Server HMM