IBM 865951Y - Netfinity 5000 - 51Y, Руководство по техническому обслуживанию аппаратной части

Страница: 85 / 220

Completing the installation
Before you begin
Ÿ
Complete all the installation procedures for the
internal options you have chosen to install.
Ÿ
Read “Safety information” on page 176.
Ÿ
If you have a tower model, continue with “Completing
the tower model installation.”
Ÿ
If you have a rack model, go to “Completing the rack
model installation” on page 80.
Completing the tower model installation
1. Install the cover on the server.
a. Align the left-side cover with the left side of the
server, about 25 mm (1 inch) from the front of
the server; place the bottom of the left-side cover
on the bottom rail of the left-side frame.
b. Insert the tabs at the top of the cover into the
slots at the top of the server side.
c. Hold the cover against the server and slide the
cover toward the front of the server until the
cover clicks into place.
Note
Be sure the front edge of the cover is flat
against the server.
2. Replace the bezel, if it was removed.
a. Place the bezel tabs
.1/
in the slots at the
bottom front of the server.
b. Press the top of the bezel toward the server front
until the bezel clicks into place.
Netfinity 5000 - Type 8659
77