IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 89 / 145

Configure/View Host Adapter Settings:
To view or change the SCSI controller settings, select
Configure/View Host Adapter Settings and follow the
instructions on the screen. This menu has the following
selections:
Host Adapter SCSI ID
Change the SCSI ID of the SCSI controller from its
default value of 7.
SCSI Parity Checking
Enable or disable SCSI adapter parity checking. The
default value is
Enabled. This default value should not
be changed.
Host Adapter SCSI Termination
Configure SCSI controller termination. The default
value is
Low On / High On.
SCSI Device Configuration
Configure SCSI device parameters. Before you can
make updates, you must know the ID of the device
whose parameters you want to configure.
Advanced Configuration Options
View or change the settings for advanced configuration
options. These options include enabling support for
large hard disk drives and support for drives with Ultra
SCSI speed.
SCSI Disk Utilities:
To view the IDs that are assigned to each SCSI device or
to format a SCSI device, select SCSI Disk Utilities from
the SCSISelect Utility program menu.
To use the utility program, select a drive from the list.
Read the screens carefully before making a selection.
Low-Level Format Program:
You can perform a low-level format on hard disk drives
using the
Format Disk feature of the SCSISelect Utility
program.
Depending on the hard disk capacity, the Low-Level
Format program could take up to two hours.
Use the Low-Level Format program:
Ÿ
When installing software that requires a low-level
format
Ÿ
When recurring messages from the diagnostic tests
directing you to run the Low-Level Format program on
the hard disk
Ÿ
As a last resort before replacing a failing hard disk
drive
84
PC Server HMM