IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 12 / 145

Command Line Options
The following Command Line Options are available when
initially loading the diagnostic program from within its
directory of a DOS operating system. Loading
QAPlus/PRO from a DOS system command line allows
selected tests and options to run with minimum memory.
At a DOS operating system prompt, where the
QAPlus/PRO files reside, type QAPLPRO /XXX (where
XXX represents one or more of the following from the list
below) then, press Enter.
Keys Action
Spacebar Toggle modules on/off (or toggle tests on/off)
F2 View test results log
F10 Local menu
+
Next logical unit number (for example, LUN 1,
LUN 2, and so on)
−
Previous logical unit number
Command Action
/B&W The /B&W command line option forces the
program to load in Black and White
(Monochrome) mode, which is often more
readable on laptop computers.
/LOG=file The /LOG=file command line option directs
the test programs to start using a specified
Error Log file.
/INT10 The /INT10 command line option forces the
test programs to use the BIOS for screen
writes.
/OXXX The /OXXX command line option, where
XXX=test group (for example, MBD, MEM,
VID, HDU, FDU, KBD, COM, LPT, and so
on), omits the designated test group from
loading.
/OALL The /OALL command line option omits all
test groups from loading. This command
can be used in conjunction with the /IXXX
command.
/IXXX The /IXXX command line option, where
XXX=test group (for example, MBD, MEM,
VID, HDU, FDU, KBD, COM, LPT, and so
on), loads the designated test group for
testing. This option is helpful if you have
insufficient memory available to load all of
the test programs simultaneously.
/USRCONFIG
=file The /USERCONFIG=file command line
option tells the test programs to look for a
user diagnostic configuration file other than
the default USERDIAG.CFG.
General Checkout/Diagnostics QAPlus/PRO
7