IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 51 / 145

Novell NetWare DOS ODI Driver Messages:
This section contains the error messages for the Novell
NetWare DOS ODI device driver. The explanation and
recommended action are included with each message.
PCNTW-DOS-1 The LSL is not loaded.
Explanation: The Link Support support module
(LSL.COM) is not loaded.
Action: Load LSL.COM; then, load the device driver.
PCNTW-DOS-2 The LSL has no more room for a board
using Frame
<
string
>
.
Explanation: The maximum number of adapters, whether
virtual or physical, has been registered with the Link
Support Layer. In the PC Server 325, the DOS ODI LSL
can support up to five PCI Ethernet adapters, plus the
Ethernet controller in the system board.
Action: Reduce the number of active adapters in the
systems by removing an adapter, or by decreasing the
number of frame types activated by Multiple Link Interface
Driver (MLID).
PCNTW-DOS-3 Could not find PCNTNW MLID to
unload.
Explanation: A request was made to unload PCNTNW
MLID, but the MLID is not loaded.
Action: None.
PCNTW-DOS-4 A TSR is loaded above the PCNTNW
MLID.
Explanation: You tried to unload the PCNTNW MLID
from memory, but the PCNTNW MLID detected another
Terminate and Stay Resident (TSR) program loaded above
the MLID. For the PCNTNW MLID to unload safely, you
must first unload any TSR programs that were loaded after
you loaded the MLID.
Action: Either unload the other TSR program before
loading the PCNTNW MLID, or unload the TSR program
before attempting this operation.
PCNTW-DOS-5 PCNTNW MLID could not be unloaded;
the operation was aborted.
Explanation: The PCNTNW MLID attempted to remove
the resident PCNTNW MLID from memory, and failed. A
hardware error has probably occurred.
Action: Run the Ethernet diagnostic.
46
PC Server HMM