IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 34 / 145

11. At the next screen, carefully verify that the information
is correct; then, press Enter.
12. At the Add Confirmation window, press Enter again.
13. In the next window (add), press Enter. The adapter
description appears in the selected slot.
14. Verify the installation; then press F10.
15. At the next menu, select Save and exit the
configuration utility.
Note
PCI devices do not require .CFG files.
Device Drivers:
Device drivers are programs designed to support a specific
type of hardware device. They provide instructions that
enable the computer to interact with the device, or to take
advantage of a device's special feature. The device driver
might be supplied with the operating system, the
application program, or on the option diskette. Not all
devices require device drivers. Refer to the documentation
supplied with the option for additional information.
Sample Applications:
Some optional devices provide small applications or
sampler files. These applications demonstrate the
capabilities of the device and serve as software examples
for programming the device. Refer to the documentation
supplied with the option for additional information.
Memory:
Notes
1. Not performing the following procedure could
result in memory errors, POST error 164, and in
the operating system not recognizing the added
(or removed) memory.
2. After you add or remove memory, you must
update the Configuration/Setup Utilities program.
1. Power-on the server and watch the screen.
2. When the message Press F1 to enter
Configuration/Setup appears, press F1.
3. Select Save Settings, then exit Setup.
Notes
1. The server supports 60 ns, 32 MB, 64 MB, and
128 MB, Buffered EDO, ECC DIMMs.
2. For signal quality, install the largest size DIMM
starting from the outside edge DIMM connector,
J2. See “Processor Board” on page 101.
PC Server 325 - Type 8639
29