IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 38 / 145

Note
Start the EISA Configuration Diskette to view the
addresses used by the system board functions. Use
the Advanced function of Step 3, View or edit details
to view the addresses used by the adapters. (See
“EISA Configuration Advanced Function” on page 26
for instructions.)
Configuration/Setup Utility Program
To access the Setup program:
1. Remove all diskettes from the server.
Note
Never start the Setup program while using the
EISA Configuration program.
2. Power-on the server and watch the screen. Be ready
to act quickly.
3. After the IBM logo screen appears, you are prompted
to
Press <F1> to enter SETUP
. As soon as you see
that prompt, press the F1 key. If the Setup program
screen doesn't appear, restart the system and try
again.
Notes
1. If a configuration error occurs, a prompt
appears before the operating system starts
(see “Configuration Conflicts” on page 30).
2. Record the current settings before making
changes to the configuration.
4. Follow the instructions on the screen to view or
change the configuration.
You must
correctly exit from the Setup program to
save the configuration information.
5. Press Esc or move the cursor to the Exit Setup
option on the menu bar.
6. Select Exit Setup from the menu bar.
7. Select Save changes and exit.
Advanced Setup:
Select Advanced Setup from the Configuration/Setup
Utility program to change values for advanced hardware
features such as cache control and ROM shadowing.
A warning message appears when you select this choice,
to alert you that the system may malfunction if these
options are configured incorrectly. Follow the instructions
on the screen carefully.
Use the Left Arrow (
←
) and Right Arrow (
→
) keys to
advance through the options for the selected menu item.
PC Server 325 - Type 8639
33