IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 77 / 145

Manual I/O Address and Interrupt Assignment:
If you do not have the EISA Configuration Utility program
or the Configuration/Setup Utility ISA Legacy Resources
option follow this procedure.
1. Refer to the lists in the table on page 70 and
“Configuration Considerations:” on page 70, and
select available I/O addresses and interrupts for the
adapter ports.
2. Enter these I/O addresses and interrupts on the
Configuration Data Worksheet below.
Continue with “Adapter Configuration:.”
Adapter Configuration:
1. Power-off the system.
2. Make sure the adapter configuration diskette is not
write protected.
3. Insert the adapter configuration diskette into the
diskette drive.
4. Press Ctrl
+
Alt
+
Del to restart the system.
The adapter configuration Flash Utility menu is
displayed:
Flash Utility
Select one:
Configure Service Processor
View Service Processor Configuration
Update Service Processor
Set Up COM Ports
Configure OS Watchdog Timer
Exit
Enter F1=Help F3=Exit
5. Look at the two LED displays on the adapter and
check the dot on each LED for the indications listed in
the table on page 73.
Configuration Data Worksheet
I/O
Address
Interrupt
Service Processor Port
Adapter COM A
Adapter COM B
72
PC Server HMM