IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 16 / 145

1. From the expanded Test Group, use the up and down
arrow keys (
↑
and
↓
) to move to the highlighted bar
to the test you want to run.
2. Press Enter to run the test.
Note
The results of the test appear in the
lower-right-hand Test Log window. Also, if you
enabled Test Logging, the results are recorded in
the Test Log.
3. When the test completes, press Esc to return to the
Test Group Menu.
Stopping the Tests
To stop running a specific test or stop testing after you
have started a test, press Esc while the test is running.
The test pauses at the first possible opportunity, and the
Skip/Abort Test Menu appears with the following options:
QAPlus/PRO Diagnostics Control Keys
The following is a list of the QAPlus/PRO Diagnostics
Control Keys, when used and a description of the
diagnostics response.
Option Action
Continue The test program begins testing where it left
off.
Skip to
next test The test program skips the current test, but
remaining tests for the selected Test Module
continue.
Skip to
next group The test program skips the remaining tests in
the current test group.
Abort all
tests The test program stops and returns to the
previous menu.
Control
Keys When Used Diagnostics Response
Ctrl+A Main Menu Allows you to select test from
the sub menus that are
highlighted with red letters.
Attention
If selected, these tests
will erase the information
stored on the diskette or
hard disk drive.
Up and
Down
Arrow
Keys Main Menu
Module Test
Menu
Test Group
Menu Highlights an item you want to
select.
General Checkout/Diagnostics QAPlus/PRO
11