IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 45 / 145

Novell NetWare Server ODI Driver
Messages:
This section contains the error messages for the Novell
NetWare server ODI driver. The explanation and
recommended action are included with each message.
PCNTNW-NW-026 The MSM is unable to parse a
required custom keyword.
Explanation: The user entered an incorrect parameter
keyword.
Action: Enter the keyword correctly. Then, reload the
driver.
PCNTNW-NW-054 The board did not respond to the
initialization command.
Explanation: The board did not respond when the driver
tried to initialize it.
Action: Perform the following steps:
1. Verify that the Ethernet jumper on the system board
is set to the default, enabled position.
2. Go to “General Checkout/Diagnostics QAPlus/PRO”
on page 1 to run the diagnostic utility.
PCNTNW-NW-58 The board did not respond to the
initialization command.
Explanation: The IRQ setting might be incorrect with the
hardware setting, or the EEPROM might be corrupted.
Action: Perform the following steps:
1. Verify that the IRQ settings in the NET.CFG file
match the configuration settings in the
Configuration/Setup utility programs. See “PCI Bus
Control” on page 34 for information on setting the
interrupt requests.
2. Verify that the EEPROM on the system board is
programmed correctly.
PCNTNW-NW-66 The cable might be disconnected
from the board.
Explanation: The cable might be disconnected from the
server's Ethernet port.
Action: Verify that a cable is connected to the AUI port or
the 10BASE-T port.
40
PC Server HMM