IBM 8639 - PC Server 325, Руководство по техническому обслуживанию аппаратной части

Страница: 100 / 145

Internal Drive Bays
Internal drives are installed in
bays. The bays are
numbered 1 through 7.
1
2
3
4
5
6
7
Note
If you install a drive that uses removable media
(diskette, optical disc, or tape), you might need to
remove or change the cover plate.
Ÿ
Bay 1 is for 5.25-inch devices only. Some models
are supplied with a hard disk drive preinstalled in bay
7.
Ÿ
Bay 2 has a preinstalled SCSI CD-ROM drive.
Ÿ
Bay 3 is for 3.5-inch diskette interface devices, such
as a diskette drive or tape backup unit that uses the
diskette cable. All models are supplied with a
diskette drive preinstalled in bay 3.
Ÿ
Bays 4–7 are for 3.5-inch drives.
Ÿ
A full-high drive occupies two bays between bay 3
and 7. If you are installing a removable media device
in bays 3 through 7, you must remove the tray from
the front of both bays.
Ÿ
The PC Server 325 Type 8639 is shipped with a 7
drop, 16-bit SCSI cable.
To install an 8-bit device, you will need a 16-bit to
8-bit SCSI Internal Converter. See “SCSI Drives” on
page 82 for additional information.
Ÿ
The IBM 3.5-inch rewritable optical disc drive requires
a special mounting bracket.
PC Server 325 - Type 8639
95