Hyster S40XM Скачать руководство пользователя

Страница: 107 / 134

MAINTENANCE

105

No smoking.
All fuels for internal combustion engines are very

flammable.
Fill the fuel tank only in a designated area with good

ventilation. Have a fire extinguisher available.
Never fill the fuel tank near an open flame or near

equipment that can create sparks. Never check fuel

level or check for leaks with an open flame.
Breathing fuel vapor may cause nausea, uncon-

sciousness or death. Long term exposure to gasoline

vapors may cause liver or kidney damage and cancer.

Avoid breathing vapor.

Liquefied Petroleum Gas (LPG)

WARNING

Close the fuel valve on the tank when parking the lift

truck more than momentarily. Do not park the lift

truck near heat or ignition sources.
Do not store LPG tanks near heat or an open flame.

For complete instructions on the storage of LPG

fuels, refer to ANSI/NFPA 58 & 505.
LPG is extremely flammable. When checking or filling

an LPG tank: No smoking. Stop engine.
Frost on the surface of the tank, the valves or fittings

and the odor of LPG fuel indicates a leak. Inspect the

LPG system and repair a leak immediately. An LPG

fuel leak creates an explosion and fire hazard. Do not

attempt to start the engine if there is a leak in the

LPG fuel system.
Only trained and authorized personnel are permitted

to operate filling equipment.
Use only the LPG tank indicated on the label on the

tank bracket. Do not use an LPG tank that is dam-

aged. A damaged LPG tank must be removed from

service.

Property of American Airlines

Содержание S40XM







































































































































Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды

Hyster S40XM, Руководство по эксплуатации

Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды