Hyster S40XM Скачать руководство пользователя страница 40

Страница: 40 / 134

OPERATING PROCEDURES

Do not start nor operate the lift truck,

including any of its functions or attach-
ments, from any place other than the
designated operator’s position.

Starting Procedures

Starting Procedures, Gasoline Or LPG Engine

WARNING

LPG is very flammable. An odor of LPG fuel can indi-

cate a leak in the fuel system. DO NOT start the en-

gine until the fuel leak is repaired.

1. If the lift truck uses LPG fuel, open the fuel valve on the

LPG tank.

2. Make sure the parking brake is applied or push on the

inching/brake pedal.
3. If equipped, put the direction control lever for the trans-

mission in the

NEUTRAL (N)

position.

CAUTION

Do not engage the starter for more than 30 seconds

at a time. If the engine does not start, turn the key

switch to OFF. Wait 60 seconds before engaging the

starter again.

4. Turn the key to the

START

position to engage the

starter.

5. If the engine does not start after four attempts, get help

from authorized service personnel.

6. When the engine is running, check the gauges and in-

dicator lights for the correct operation. See the IN-

STRUMENTS AND CONTROLS section in this

OPERAT-

ING MANUAL

for a description of the correct operation.

Starting Procedures, Diesel Engine

1. Make sure the parking brake is applied or push on the
inching/brake pedal.

2. If equipped, put the direction control lever for the trans-
mission in the

NEUTRAL (N)

position.

3. Turn the key to the

position to activate the cold

start aid (glow plugs). The indicator light on the instrument

cluster is

when the cold start aid is activated. When

the indicator light goes out, the engine can be started.

The length of time that the light is

is determined by

the temperature of the engine.

Property of American Airlines

Содержание S40XM







































































































































Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды

Hyster S40XM, Руководство по эксплуатации

Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды