Hyster S40XM Скачать руководство пользователя страница 3

Страница: 3 / 134

FOREWORD

To OWNERS, USERS, and OPERATORS:

The safe and efficient operation of a lift truck

requires

skill and alertness on the part of the operator. To develop

the skill required the operator must:

•

Receive training in the proper operation of THIS lift
truck.

•

Understand the capabilities and limitations of the lift
truck.

•

Become familiar with the construction of the lift truck
and see that it is maintained in good condition.

•

Read and understand the warnings and operating
procedures in this manual.

In addition, a qualified person, experienced in lift truck oper-

ation, must guide a new operator through several driving and

load handling operations before the new operator attempts

to operate the lift truck alone.

It is the responsibility of the employer to make sure that

the operator can see, hear, and has the physical and
mental ability to operate the equipment safely.

Various laws and regulations require the employer to train

lift truck operators. These laws and regulations include:

•

Occupational Safety and Health Act (USA)

•

Canada Material Handling Regulations

NOTE:

A comprehensive operator training program is avail-

able from HYSTER COMPANY. For further details, contact
your dealer for Hyster lift trucks.

This

OPERATING MANUAL

contains information neces-

sary for the operation and maintenance of a basic fork lift

truck. Optional equipment is sometimes installed that can
change some operating characteristics described in this

manual. Make sure the necessary instructions are avail-
able and understood before operating the lift truck.



HYSTER COMPANY 2003

Property of American Airlines

Содержание S40XM







































































































































Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды

Hyster S40XM, Руководство по эксплуатации

Результаты поиска

Содержание S40XM

Отзывы:

Похожие инструкции для S40XM

Бренды по названию

Популярные бренды